How to add a key for BMW CAS4 mask 5M48H/1N35H by XTool A80 Pro

 This article is going to show you how to add a key for BMW CAS4 mask 5M48H/1N35H via OBD.

Tools:

XTool A80Pro

KC501 Key Programmer

Procedure:

Connect A80Pro, VCI, KC501 and OBD port.

Special Function>>Key Programming>>BMW>>Immobilizer>>Manual select>>CAS4/CAS4+>>Keys Matching

Then we have our vehicle info.

Keys info.

We select “Key pos 3” and click on “KC100/KC501 generate spare key”.

Select “Require original car key to operate” and follow the prompt.

Finish!

We exit and enter “Key matching” again, and we can see the key pos 3 is occupied already.

Alright, that’s how we add a key for BMW CAS4 via OBD using XTool A80Pro Scanner and KC501 Programmer.

How to Program Toyota Corolla 2021 Smart Key by Autel IM608

Autel MaxiIM IM508 and IM608 Released Toyota 2019-2021 Proximity Smart Key Programming without PIN or NASTF. Here Cnautotool.com introduce 2 ways to add spare key to Corolla with 4A proximity.

Way 1: Remove Smart Box
Way 2: Don’t need to remove smart box

Way 1: Remove Smart Key
Model example: Toyota Corolla Altis 2021

Remove Smart Box from the vehicle and connect with Gbox following operation guide
Select Toyota-Manual selection- Other- Corolla- 2009 onwards- Smart Key- ZRE (2019-)

Select Control Unit- Kyeless Ssystem(CAN)- Backup IMMO Data
Backing up EEPROM data that can be used to add more smart key without password
Remove the smart box and then connect with G-Box follow operation guide

Press Yes to continue
Communicating with the smart box

Backing up EEPROM
File your name file and press Save

Re-plug smart box back to the vehicle
Select Add Smart Key
Add more Key Max 4 keys
Turn on ignition switch
Turn ignition off and turn hazard light on
Press Yes to continue
Confirm you have backuped eeprom file from this vehicle

Choose your backup EEPROM data file

Touching working key on push start button if will hear 1 beep

Touching new key on push start button if will hear 2 beeps

Keep touching new smart remote on ignition button until finish
Turn on ignition switch
Touching ignition b button with new smart key again
Sound 1 beeplearn key success
Test remote, all remote ok
Way 2: Without removing smart box+ OBD

Connect G-box2 directly with fuse box of the smart box following the operation guide
The connect g-box2 with IM508/IM608 programmer

Follow similar steps in Way 1 to
1). Backup eeprom
2). Add smart key
3). Learn key.

How to use OBDSTAR X300DP Plus Program 2016 Ford F150 Key

 

OBDSTAR X300 DP PLUS PAD2 is a new Android-based good working for key programming , today lets share the steps how to programming ford F150 key as bellow :

1:Connect OBDSTAR Key Master Plus(X300 DP Plus) to Ford F150 obd port

Select “Diag Program”

Select “IMMOBILISER” and select “Ford/LINCOLN”

Select “Ford/LINCOLN V32.43” and click “Enter” to continue

Select “Ford” and click “Enter”
Select “Immobiliser” and click “Enter”
Select “F150/F250”
Select “2015-2019”
Select “Key Number” and click “Enter”

5

Make sure there are at least 2 keys
2:Insert a working key into ignition and turn on the light the dashboard

Press “Enter” to continue
And make sure WIFI is connected,then click “Enter”

Wait for reading data
Configuring the system,please wait…
3:Then insert a new key and switch ignition on,click “Enter”

Key program success
For more instructions of this product , welcome to check on www.cnautotool.com